In areas that are highly affected by snow falls during the winter months, the roofs of the houses are affected by the ice dams. Mostly, they form on the rooftops edges as a result of the water from the melting snow freezing and forming a hill on the edge of the roofs that impending further water flow. The water that is held here may then seep into your house and end up causing a major damage.
It is therefore vital to try and remove the ice dams immediately after you have identified earlier signs and you can apply salt to melt it away, or you can use a rake to scrap it off. To the aid of the people who find it hard to do this of their own, various companies that help in removal of the iced a nice dams have been formed. The best ice dam removal firm should be hired by every person who is looking for the services.
Some factors that hen come in to help every person in employing the best ice dam removal services. The level of experience should be the first consideration to observe. The hired iced a removal company should be the one that has specialized in this field for the longest duration of time. This is because they will have the right expertise and skills to do a clean job. The prospective ice dam removal agency should be well bonded and also have a good insurance policy.
It is not only having an insurance cover but also it should be covering the whole process of ice dam removal. This ensures that you will be well compensated in case there is a damage on your roof during the removal process of the ice dam. Another factor that you should observe is the method used, and the best company is the one that uses the steam removal method. This is because it is the one best method of ice dam removal as it is the safest and most effective.
For easy melting of the ice when using the steam method, the boiler should be able to heat the water to about 250 degrees. It is also important to have a good check on the other equipments used. Here you check at the types of shovels and roof rakes. These shovels and rakes should be having cutting edges made of plastic material or if it is metallic it should have rollers made of plastic and all these equipments should be up to date with the technological advancement. This ensures that you avoid any kind of damage that the metal edges could cause to your roof.